From be4144f3420e9ba4b13d97c68ddbe4e1cc39296a Mon Sep 17 00:00:00 2001
From: Shahovalov MIkhail <m.shahovalov@yandex.ru>
Date: Tue, 20 Oct 2026 07:21:46 +0300
Subject: [PATCH] =?UTF-8?q?PRINT=5FSTART:=20=D0=BF=D1=80=D0=BE=D0=B3=D1=80?=
 =?UTF-8?q?=D0=B5=D0=B2=20=D0=BA=D0=B0=D0=BC=D0=B5=D1=80=D1=8B=20=D0=BF?=
 =?UTF-8?q?=D0=B5=D1=80=D0=B5=D0=B4=20QGL=20=D0=B4=D0=BB=D1=8F=20ABS?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

- CHAMBER по умолчанию 0: без параметра ожидания нет
- Nevermore включается сразу после нагрева стола (>90 °C)
- если камера холоднее CHAMBER: парковка над столом, CPAP ~40%, M191
- M191 ждёт temperature_sensor Chamber

Co-Authored-By: Claude <noreply@anthropic.com>
---
 macros/main.cfg | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/macros/main.cfg b/macros/main.cfg
index a43b2be..3013041 100644
--- a/macros/main.cfg
+++ b/macros/main.cfg
@@ -134,7 +134,7 @@ gcode:
     #PRINT_MIN={first_layer_print_min[0]},{first_layer_print_min[1]} PRINT_MAX={first_layer_print_max[0]},{first_layer_print_max[1]}
     {% set BED_TEMP = params.BED|default(60)|float %}
     {% set EXTRUDER_TEMP = params.EXTRUDER|default(210)|float %}
-    {% set CHAMBER = params.CHAMBER|default(35)|float %}    
+    {% set CHAMBER = params.CHAMBER|default(0)|float %}
     {% set use_purge = params.PURGE|default(0)|int %}
     {% if params.BED_TYPE %}
       INIT_BED_TYPE BED_TYPE="{params.BED_TYPE}"
@@ -144,7 +144,17 @@ gcode:
     M140 S{BED_TEMP}    
     M141 S{CHAMBER}    
     M109 S150
-    M190 S{BED_TEMP} 
+    M190 S{BED_TEMP}
+    {% if BED_TEMP > 90 %}
+      _NEVERMORE_ON
+    {% endif %}
+    {% if CHAMBER > 0 and printer["temperature_sensor Chamber"].temperature < CHAMBER %}
+      M117 Heat soak...
+      PARKBED                           ; nozzle low over the hot bed
+      M106 S102                         ; CPAP ~40% (x0.8 max_power) spreads bed heat
+      M191 S{CHAMBER}
+      M106 S0
+    {% endif %}
     BED_MESH_CLEAR
     G90 # Use absolute coordinates
     #SET_GCODE_OFFSET Z=0.0    
@@ -161,11 +171,8 @@ gcode:
     Smart_Park    
     M117 Heating...
     #M190 S{BED_TEMP}    
-    M109 S{EXTRUDER_TEMP}               ; M109 heat and wait for it to reach temp  
-    {% if BED_TEMP > 90 %}
-      _NEVERMORE_ON
-    {% endif %}
-    M117   
+    M109 S{EXTRUDER_TEMP}               ; M109 heat and wait for it to reach temp
+    M117
     STATUS_CLEANING
     {% if use_purge %}
       VORON_PURGE
@@ -229,7 +236,9 @@ gcode:
 gcode:
     {% set s = params.S|default(0)|float %}
     M141 S{s}
-    #TEMPERATURE_WAIT SENSOR="temperature_fan chamber" MINIMUM={s}  
+    {% if s > 0 %}
+      TEMPERATURE_WAIT SENSOR="temperature_sensor Chamber" MINIMUM={s}
+    {% endif %}