diff --git a/crowsnest.conf b/crowsnest.conf
index 1226025..c2e33ef 100644
--- a/crowsnest.conf
+++ b/crowsnest.conf
@@ -46,7 +46,7 @@ mode: MJPG
 port: 8081          
 #device: /dev/v4l/by-path/platform-5101000.usb-usb-0:1.1:1.0-video-index0
 device: /dev/v4l/by-id/usb-DSJ_UC60_Video_200901010001-video-index0
-resolution: 1600x1200 #176x144, 320x240, 352x288, 640x480, 640x360, 640x400, 800x600, 1024x768, 1280x720, 1280x960, 1600x1200, 1920x1080, 2048x1536, 2560x1440, 2592x1944
+resolution: 1280x960 #176x144, 320x240, 352x288, 640x480, 640x360, 640x400, 800x600, 1024x768, 1280x720, 1280x960, 1600x1200, 1920x1080, 2048x1536, 2560x1440, 2592x1944
 max_fps: 15
 v4l2ctl: focus_auto=0 #brightness=-10, backlight_compensation=0
 
diff --git a/toolhead_sb.cfg b/toolhead_sb.cfg
index ec5f06c..b12ea23 100644
--- a/toolhead_sb.cfg
+++ b/toolhead_sb.cfg
@@ -6,16 +6,16 @@
 canbus_uuid: 350f10596216
 
 [firmware_retraction]
-retract_length: 0.4
+retract_length: 0.3
 #   The length of filament (in mm) to retract when G10 is activated,
 #   and to unretract when G11 is activated (but see
 #   unretract_extra_length below). The default is 0 mm.
-retract_speed: 30
+retract_speed: 35
 #   The speed of retraction, in mm/s. The default is 20 mm/s.
 #unretract_extra_length: 0
 #   The length (in mm) of *additional* filament to add when
 #   unretracting.
-unretract_speed: 30
+unretract_speed: 35
 #   The speed of unretraction, in mm/s. The default is 10 mm/s.
 
 [adxl345]