mikhail/LeoVoron2.4
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Autocommit from 2025-03-29 08:17:20

Browse Source 
Klipper version: v0.12.0-382-ga18c74be0

Moonraker version: v0.9.3-3-gccfe32f

Mainsail version: v2.13.2
This commit is contained in:
Михаил
2025-03-29 08:17:20 +03:00
parent e540d474f1
commit 729965dbcd
4 changed files with 66 additions and 223 deletions
Download Patch File Download Diff File Expand all files Collapse all files

174
macros/homing.cfg.old
View File

@@ -1,174 +0,0 @@
[gcode_macro MOVE_UP]
variable_set_kinematic_z: 20
variable_up_z: 10
gcode:
SAVE_GCODE_STATE NAME=my_move_up_state
{% if not 'z' in printer.toolhead.homed_axes %}
SET_KINEMATIC_POSITION Z={set_kinematic_z}
{% endif %}
G91
G0 Z{up_z} F1200
RESTORE_GCODE_STATE NAME=my_move_up_state
[gcode_macro _HOME_X]
variable_homing_current: 0.65
variable_start_retract: 15
gcode:
# Always use consistent run_current on A/B steppers during sensorless homing
{% set RUN_CURRENT_X = printer.configfile.settings['tmc2240 stepper_x'].run_current|float %}
{% set RUN_CURRENT_Y = printer.configfile.settings['tmc2240 stepper_y'].run_current|float %}
SET_TMC_CURRENT STEPPER=stepper_x CURRENT={homing_current}
SET_TMC_CURRENT STEPPER=stepper_y CURRENT={homing_current}
M117 Homing X...
SET_KINEMATIC_POSITION X={start_retract}
G91
G1 X-{start_retract} F1200
M400
G28 X
G91
G1 X-60 F1200
#G4 P500
M117
SET_TMC_CURRENT STEPPER=stepper_x CURRENT={RUN_CURRENT_X}
SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}
[gcode_macro _HOME_Y]
variable_homing_current: 0.65
variable_start_retract: 15
gcode:
# Set current for sensorless homing
{% set RUN_CURRENT_X = printer.configfile.settings['tmc2240 stepper_x'].run_current|float %}
{% set RUN_CURRENT_Y = printer.configfile.settings['tmc2240 stepper_y'].run_current|float %}
SET_TMC_CURRENT STEPPER=stepper_x CURRENT={homing_current}
SET_TMC_CURRENT STEPPER=stepper_y CURRENT={homing_current}
#SET_TMC_FIELD FIELD=SGT STEPPER=stepper_x VALUE=1
#G4 P1000
M117 Homing Y...
SET_KINEMATIC_POSITION Y={start_retract}
G91
G1 Y-{start_retract} F1200
M400
G28 Y
G91
G1 Y-10 F1200
#G4 P500
M117
# Set current during print
SET_TMC_CURRENT STEPPER=stepper_x CURRENT={RUN_CURRENT_X}
SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}
[homing_override]
axes: xyz
gcode:
{% set home_all = 'X' not in params and 'Y' not in params and 'Z' not in params %}
{% set move_x = params.X|default(printer.toolhead.axis_maximum.y/2)|int %}
{% set move_y = params.Y|default(printer.toolhead.axis_maximum.y/2)|int %}
{% if params.Z == '' %}
{% set move_z = 10 %}
{% else %}
{% set move_z = params.Z|default(10)|int %}
{% endif %}
SET_GCODE_VARIABLE MACRO=_KNOMI_STATUS VARIABLE=homing VALUE=True
STATUS_HOMING
{% if home_all or 'X' or 'Y' in params %}
INIT_TMC STEPPER=stepper_y
INIT_TMC STEPPER=stepper_x
{% endif %}
{% if home_all or 'Z' in params %}
BED_MESH_CLEAR
MOVE_UP
{% endif %}
{% if home_all or 'X' in params %}
_HOME_X
{% endif %}
{% if home_all or 'Y' in params %}
_HOME_Y
{% endif %}
G90
{% if home_all or 'Z' in params %}
G1 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} F12000 #probe point
G28 Z
G1 Z{move_z} F1200
{% endif %}
#{ action_respond_info("Move X,Y => {},{}".format(params.X,params.Y)) }
{% if params.X %}
G1 X{move_x} F12000
{% endif %}
{% if params.Y %}
G1 Y{move_y} F12000
{% endif %}
STATUS_OFF
SET_GCODE_VARIABLE MACRO=_KNOMI_STATUS VARIABLE=homing VALUE=False
[gcode_macro CG28]
gcode:
{% if "xyz" not in printer.toolhead.homed_axes %}
G28
{% endif %}
[gcode_macro PARKFRONT]
gcode:
CG28 ; home if not already homed
SAVE_GCODE_STATE NAME=PARKFRONT
G90 ; absolute positioning
G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} Z{printer.toolhead.axis_maximum.z/2} F6000
RESTORE_GCODE_STATE NAME=PARKFRONT
[gcode_macro PARKFRONTLOW]
gcode:
CG28 ; home if not already homed
SAVE_GCODE_STATE NAME=PARKFRONT
G90 ; absolute positioning
G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} Z20 F6000
RESTORE_GCODE_STATE NAME=PARKFRONT
[gcode_macro PARKREAR]
gcode:
CG28 ; home if not already homed
SAVE_GCODE_STATE NAME=PARKREAR
G90 ; absolute positioning
G0 X{printer.toolhead.axis_minimum.x+10} Y{printer.toolhead.axis_maximum.y-10} Z{printer.toolhead.axis_maximum.z-50} F6000
RESTORE_GCODE_STATE NAME=PARKREAR
[gcode_macro PARKCENTER]
gcode:
CG28 ; home if not already homed
SAVE_GCODE_STATE NAME=PARKCENTER
G90 ; absolute positioning
G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} Z{printer.toolhead.axis_maximum.z/2} F6000
RESTORE_GCODE_STATE NAME=PARKCENTER
[gcode_macro PARKBED]
gcode:
CG28 ; home if not already homed
SAVE_GCODE_STATE NAME=PARKBED
G90 ; absolute positioning
G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} Z15 F6000
RESTORE_GCODE_STATE NAME=PARKBED

21
macros/main.cfg
View File

@@ -16,6 +16,7 @@ gcode:
[include ../KAMP_Settings.cfg]
#[include ../KAMP/KAMP_Settings.cfg]
[include tools.cfg]
[include nevermore.cfg]
@@ -155,6 +156,9 @@ gcode:
#M190 S{BED_TEMP}
M109 S{EXTRUDER_TEMP} ; M109 heat and wait for it to reach temp
SFS_ENABLE
{% if BED_TEMP > 100 %}
_NEVERMORE_ON
{% endif %}
M117
STATUS_CLEANING
VORON_PURGE
@@ -187,6 +191,7 @@ gcode:
G0 X{park_xy[0]} Y{park_xy[1]} F{park_speed} ; park nozzle at rear
#BED_MESH_CLEAR
SFS_DISABLE
_NEVERMORE_OFF
#M141 S35
SET_STEPPER_ENABLE STEPPER=extruder ENABLE=0 #disable stepper
STATUS_OFF
@@ -207,13 +212,13 @@ gcode:
[gcode_macro M141]
gcode:
{% set s = params.S|default(0)|float %}
SET_TEMPERATURE_FAN_TARGET temperature_fan=chamber target={s}
#SET_TEMPERATURE_FAN_TARGET temperature_fan=chamber target={s}
[gcode_macro M191]
gcode:
{% set s = params.S|default(0)|float %}
M141 S{s}
TEMPERATURE_WAIT SENSOR="temperature_fan chamber" MINIMUM={s}
#TEMPERATURE_WAIT SENSOR="temperature_fan chamber" MINIMUM={s}
@@ -222,6 +227,18 @@ gcode:
#LCDRGB R=0 G=1 B=0 ; Turn LCD green
PAUSE ; Pause
[gcode_macro M106]
rename_existing: M99106
variable_fan_aliases: { 'exhaust_fan': ['fan3'] }
gcode:
{% set fan = 'fan' + (params.P|int if params.P is defined else 0)|string %}
{% set speed = (params.S|float / 255 if params.S is defined else 1.0) %}
{% for key in fan_aliases %}
{% if fan in fan_aliases[key] %}
SET_FAN_SPEED FAN={key} SPEED={speed}
{% endif %}
{% endfor %}
[gcode_macro PAUSE]
rename_existing: BASE_PAUSE
gcode:

32
nevermore.cfg → macros/nevermore.cfg
View File

@@ -9,30 +9,6 @@
## (or less fan depending on your needs, like SPEED=0.8)
## in your end print code, add "UPDATE_DELAYED_GCODE ID=filter_off DURATION=180"
## this keeps your Nevermore running for 180s after the print finishes to clean the chamber a bit more.
[fan_generic Nevermore]
## Nevermore - FAN5 on Octopus
## Adjust if you use a different board or a different terminal.
pin: PD15
[menu __main __control __nevermoreonoff]
type: command
name: Nevermore {'ON' if printer['fan_generic Nevermore'].speed > 0 else 'OFF'}
enable: {'fan_generic Nevermore' in printer}
gcode:
TOGGLE_NEVERMORE
[menu __main __control __filterspeed]
type: input
enable: {'fan_generic Nevermore' in printer}
name: Filter %: {'%3d' % (menu.input*100)}%
input: {printer["fan_generic Nevermore"].speed}
input_min: 0
input_max: 1
input_step: 0.1
gcode:
SET_FAN_SPEED FAN=Nevermore SPEED={menu.input}
[delayed_gcode filter_off]
gcode:
SET_FAN_SPEED FAN=Nevermore SPEED=0
@@ -44,3 +20,11 @@ gcode:
{% else %}
SET_FAN_SPEED FAN=Nevermore SPEED=1
{% endif %}
[gcode_macro _NEVERMORE_ON]
gcode:
SET_FAN_SPEED FAN=Nevermore SPEED=1
[gcode_macro _NEVERMORE_OFF]
gcode:
SET_FAN_SPEED FAN=Nevermore SPEED=1

56
octopus_pro_1.1.cfg
View File

@@ -4,6 +4,10 @@ canbus_uuid: afcf80281237
[temperature_sensor OctopusPro]
sensor_type: temperature_mcu
[temperature_sensor Chamber]
sensor_type: ATC Semitec 104NT-4-R025H42G
sensor_pin: PF4
[output_pin ps_on]
pin: PE11
value: 1
@@ -155,30 +159,42 @@ stepper: stepper_x, stepper_y
idle_speed: 0
fan_speed: 0.6
[heater_fan Nevermore]
#[heater_fan Nevermore]
#pin: PE5
#heater_temp: 90
#max_power: 1.0
#kick_start_time: 0.5
#heater: heater_bed
#fan_speed: 1
[fan_generic Nevermore]
## Nevermore - FAN5 on Octopus
## Adjust if you use a different board or a different terminal.
pin: PE5
heater_temp: 90
max_power: 1.0
kick_start_time: 0.5
heater: heater_bed
fan_speed: 1
[temperature_fan chamber]
#[temperature_fan chamber]
#pin: PD14
#max_power: 1.0
#shutdown_speed: 0.0
#kick_start_time: 5.0
#cycle_time:0.01
#off_below:0.1
#hardware_pwm: True
#sensor_type: ATC Semitec 104NT-4-R025H42G
#sensor_pin: PF4
#min_temp: 0
#max_temp: 70
#target_temp: 40
#control: watermark
#gcode_id: C
# this is the exhaust fan
# comment out it if you don't have exhaust fan
[fan_generic exhaust_fan]
pin: PD14
max_power: 1.0
shutdown_speed: 0.0
kick_start_time: 5.0
cycle_time: 0.01
off_below:0.1
hardware_pwm: True
sensor_type: ATC Semitec 104NT-4-R025H42G
sensor_pin: PF4
min_temp: 0
max_temp: 70
target_temp: 40
control: watermark
gcode_id: C
hardware_pwm: false
[multi_pin soc_pin]
pins: PD12, PD13