Autocommit from 2025-03-29 08:17:20

Klipper version: v0.12.0-382-ga18c74be0

Moonraker version: v0.9.3-3-gccfe32f

Mainsail version: v2.13.2

macros/homing.cfg.old

@@ -1,174 +0,0 @@
-[gcode_macro MOVE_UP]
-variable_set_kinematic_z: 20
-variable_up_z: 10
-gcode:
-  SAVE_GCODE_STATE NAME=my_move_up_state
-  {% if not 'z' in printer.toolhead.homed_axes %}
-    SET_KINEMATIC_POSITION Z={set_kinematic_z}
-  {% endif %}
-  G91
-  G0 Z{up_z} F1200
-  RESTORE_GCODE_STATE NAME=my_move_up_state
-
-[gcode_macro _HOME_X]
-variable_homing_current: 0.65
-variable_start_retract: 15
-gcode:
-    # Always use consistent run_current on A/B steppers during sensorless homing
-    {% set RUN_CURRENT_X = printer.configfile.settings['tmc2240 stepper_x'].run_current|float %}
-    {% set RUN_CURRENT_Y = printer.configfile.settings['tmc2240 stepper_y'].run_current|float %}
-    SET_TMC_CURRENT STEPPER=stepper_x CURRENT={homing_current}
-    SET_TMC_CURRENT STEPPER=stepper_y CURRENT={homing_current}
-    
-    M117 Homing X...
-
-    SET_KINEMATIC_POSITION X={start_retract}
-    G91
-    G1 X-{start_retract} F1200
-
-    M400     
-    G28 X
-    
-    G91
-    G1 X-60 F1200
-    #G4 P500
-    
-    M117
-    
-    SET_TMC_CURRENT STEPPER=stepper_x CURRENT={RUN_CURRENT_X}
-    SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}      
-    
-
-[gcode_macro _HOME_Y]
-variable_homing_current: 0.65
-variable_start_retract: 15
-gcode:
-    # Set current for sensorless homing
-    {% set RUN_CURRENT_X = printer.configfile.settings['tmc2240 stepper_x'].run_current|float %}
-    {% set RUN_CURRENT_Y = printer.configfile.settings['tmc2240 stepper_y'].run_current|float %}
-    SET_TMC_CURRENT STEPPER=stepper_x CURRENT={homing_current}
-    SET_TMC_CURRENT STEPPER=stepper_y CURRENT={homing_current}
-    #SET_TMC_FIELD FIELD=SGT STEPPER=stepper_x VALUE=1
-    #G4 P1000
-
-    M117 Homing Y...
-
-    SET_KINEMATIC_POSITION Y={start_retract}
-    G91
-    G1 Y-{start_retract} F1200    
-
-    M400 
-    G28 Y
-    
-    G91
-    G1 Y-10 F1200
-    #G4 P500
-    
-    M117
-    # Set current during print
-    SET_TMC_CURRENT STEPPER=stepper_x CURRENT={RUN_CURRENT_X}
-    SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}
-
-
-[homing_override]
-axes: xyz
-gcode:
-  {% set home_all = 'X' not in params and 'Y' not in params and 'Z' not in params %}
-  {% set move_x = params.X|default(printer.toolhead.axis_maximum.y/2)|int %}    
-  {% set move_y = params.Y|default(printer.toolhead.axis_maximum.y/2)|int %}    
-  {% if params.Z == '' %}
-       {% set move_z = 10 %}
-     {% else %}
-       {% set move_z = params.Z|default(10)|int %}
-  {% endif %}
-  
-  SET_GCODE_VARIABLE MACRO=_KNOMI_STATUS VARIABLE=homing VALUE=True
-  STATUS_HOMING  
-  
-  {% if home_all or 'X' or 'Y' in params %}
-    INIT_TMC STEPPER=stepper_y
-    INIT_TMC STEPPER=stepper_x
-  {% endif %}
-
-  {% if home_all or 'Z' in params %}
-    BED_MESH_CLEAR  
-    MOVE_UP
-  {% endif %}
-  
-  {% if home_all or 'X' in params %}
-    _HOME_X
-  {% endif %}
-  
-  {% if home_all or 'Y' in params %}
-    _HOME_Y
-  {% endif %}
-  
-
-  G90
-  
-  {% if home_all or 'Z' in params %}
-    G1 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} F12000 #probe point
-    G28 Z
-    G1 Z{move_z} F1200
-  {% endif %}
-
-  #{ action_respond_info("Move X,Y => {},{}".format(params.X,params.Y)) }
-
-  {% if params.X %}
-    
-    G1 X{move_x} F12000
-  {% endif %}
-
-  {% if params.Y %}
-    G1 Y{move_y} F12000
-  {% endif %}
-  
-  STATUS_OFF
-  SET_GCODE_VARIABLE MACRO=_KNOMI_STATUS VARIABLE=homing VALUE=False
-
-[gcode_macro CG28]
-gcode:
-    {% if "xyz" not in printer.toolhead.homed_axes %}
-        G28
-    {% endif %}
-
-[gcode_macro PARKFRONT]
-gcode:
-    CG28                              ; home if not already homed
-    SAVE_GCODE_STATE NAME=PARKFRONT
-    G90                               ; absolute positioning
-    G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} Z{printer.toolhead.axis_maximum.z/2} F6000        
-    RESTORE_GCODE_STATE NAME=PARKFRONT
-
-[gcode_macro PARKFRONTLOW]
-gcode:
-    CG28                             ; home if not already homed
-    SAVE_GCODE_STATE NAME=PARKFRONT
-    G90                              ; absolute positioning
-    G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} Z20 F6000                                     
-    RESTORE_GCODE_STATE NAME=PARKFRONT
-
-[gcode_macro PARKREAR]
-gcode:
-    CG28                             ; home if not already homed
-    SAVE_GCODE_STATE NAME=PARKREAR
-    G90                              ; absolute positioning
-    G0 X{printer.toolhead.axis_minimum.x+10} Y{printer.toolhead.axis_maximum.y-10} Z{printer.toolhead.axis_maximum.z-50} F6000     
-    RESTORE_GCODE_STATE NAME=PARKREAR
-
-[gcode_macro PARKCENTER]
-gcode:
-    CG28                              ; home if not already homed
-    SAVE_GCODE_STATE NAME=PARKCENTER
-    G90                               ; absolute positioning
-    G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} Z{printer.toolhead.axis_maximum.z/2} F6000    
-    RESTORE_GCODE_STATE NAME=PARKCENTER
-
-[gcode_macro PARKBED]
-gcode:
-    CG28                               ; home if not already homed
-    SAVE_GCODE_STATE NAME=PARKBED
-    G90                                ; absolute positioning
-    G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} Z15 F6000                                     
-    RESTORE_GCODE_STATE NAME=PARKBED
-

macros/main.cfg

@@ -16,6 +16,7 @@ gcode:
 [include ../KAMP_Settings.cfg]
 #[include ../KAMP/KAMP_Settings.cfg]
 [include tools.cfg]
+[include nevermore.cfg]
 
 
 
@@ -155,6 +156,9 @@ gcode:
     #M190 S{BED_TEMP}    
     M109 S{EXTRUDER_TEMP}               ; M109 heat and wait for it to reach temp
     SFS_ENABLE
+    {% if BED_TEMP > 100 %}
+      _NEVERMORE_ON
+    {% endif %}
     M117   
     STATUS_CLEANING
     VORON_PURGE
@@ -187,6 +191,7 @@ gcode:
     G0 X{park_xy[0]} Y{park_xy[1]} F{park_speed}            ; park nozzle at rear
     #BED_MESH_CLEAR
     SFS_DISABLE
+    _NEVERMORE_OFF
     #M141 S35
     SET_STEPPER_ENABLE STEPPER=extruder ENABLE=0 #disable stepper
     STATUS_OFF    
@@ -207,13 +212,13 @@ gcode:
 [gcode_macro M141]
 gcode:
     {% set s = params.S|default(0)|float %}
-    SET_TEMPERATURE_FAN_TARGET temperature_fan=chamber target={s}
+    #SET_TEMPERATURE_FAN_TARGET temperature_fan=chamber target={s}
 
 [gcode_macro M191]
 gcode:
     {% set s = params.S|default(0)|float %}
     M141 S{s}
-    TEMPERATURE_WAIT SENSOR="temperature_fan chamber" MINIMUM={s}  
+    #TEMPERATURE_WAIT SENSOR="temperature_fan chamber" MINIMUM={s}  
 
 
 
@@ -222,6 +227,18 @@ gcode:
     #LCDRGB R=0 G=1 B=0  ; Turn LCD green
     PAUSE                ; Pause
 
+[gcode_macro M106] 
+rename_existing: M99106
+variable_fan_aliases: { 'exhaust_fan': ['fan3'] }
+gcode:
+    {% set fan = 'fan' + (params.P|int if params.P is defined else 0)|string %}
+    {% set speed = (params.S|float / 255 if params.S is defined else 1.0) %}
+    {% for key in fan_aliases %}
+      {% if fan in fan_aliases[key] %}
+        SET_FAN_SPEED FAN={key} SPEED={speed}    
+      {% endif %}
+    {% endfor %}
+
 [gcode_macro PAUSE]
 rename_existing: BASE_PAUSE
 gcode:

macros/nevermore.cfg

@@ -9,30 +9,6 @@
 ## (or less fan depending on your needs, like SPEED=0.8)
 ## in your end print code, add "UPDATE_DELAYED_GCODE ID=filter_off DURATION=180"
 ## this keeps your Nevermore running for 180s after the print finishes to clean the chamber a bit more.
-
-[fan_generic Nevermore]
-## Nevermore - FAN5 on Octopus
-## Adjust if you use a different board or a different terminal.
-pin: PD15
-
-[menu __main __control __nevermoreonoff]
-type: command
-name: Nevermore {'ON' if printer['fan_generic Nevermore'].speed > 0 else 'OFF'}
-enable: {'fan_generic Nevermore' in printer}
-gcode:
-    TOGGLE_NEVERMORE
-
-[menu __main __control __filterspeed]
-type: input
-enable: {'fan_generic Nevermore' in printer}
-name: Filter %: {'%3d' % (menu.input*100)}%
-input: {printer["fan_generic Nevermore"].speed}
-input_min: 0
-input_max: 1
-input_step: 0.1
-gcode:
-    SET_FAN_SPEED FAN=Nevermore SPEED={menu.input}
-
 [delayed_gcode filter_off]
 gcode:
     SET_FAN_SPEED FAN=Nevermore SPEED=0
@@ -44,3 +20,11 @@ gcode:
     {% else %}
       SET_FAN_SPEED FAN=Nevermore SPEED=1
     {% endif %}
+
+[gcode_macro _NEVERMORE_ON]
+gcode:
+    SET_FAN_SPEED FAN=Nevermore SPEED=1
+
+[gcode_macro _NEVERMORE_OFF]
+gcode:
+    SET_FAN_SPEED FAN=Nevermore SPEED=1

octopus_pro_1.1.cfg

@@ -4,6 +4,10 @@ canbus_uuid: afcf80281237
 [temperature_sensor OctopusPro]
 sensor_type: temperature_mcu
 
+[temperature_sensor Chamber]
+sensor_type: ATC Semitec 104NT-4-R025H42G
+sensor_pin: PF4
+
 [output_pin ps_on]
 pin: PE11
 value: 1
@@ -155,30 +159,42 @@ stepper: stepper_x, stepper_y
 idle_speed: 0
 fan_speed: 0.6
 
-[heater_fan Nevermore]
+#[heater_fan Nevermore]
+#pin: PE5
+#heater_temp: 90
+#max_power: 1.0
+#kick_start_time: 0.5
+#heater: heater_bed
+#fan_speed: 1
+
+[fan_generic Nevermore]
+## Nevermore - FAN5 on Octopus
+## Adjust if you use a different board or a different terminal.
 pin: PE5
-heater_temp: 90
-max_power: 1.0
-kick_start_time: 0.5
-heater: heater_bed
-fan_speed: 1
 
-[temperature_fan chamber]
+
+#[temperature_fan chamber]
+#pin: PD14
+#max_power: 1.0
+#shutdown_speed: 0.0
+#kick_start_time: 5.0
+#cycle_time:0.01
+#off_below:0.1
+#hardware_pwm: True
+#sensor_type: ATC Semitec 104NT-4-R025H42G
+#sensor_pin: PF4
+#min_temp: 0
+#max_temp: 70
+#target_temp: 40
+#control: watermark
+#gcode_id: C
+
+# this is the exhaust fan
+# comment out it if you don't have exhaust fan
+[fan_generic exhaust_fan]
 pin: PD14
-max_power: 1.0
-shutdown_speed: 0.0
-kick_start_time: 5.0
 cycle_time: 0.01
-off_below:0.1
+hardware_pwm: false
-hardware_pwm: True
-sensor_type: ATC Semitec 104NT-4-R025H42G
-sensor_pin: PF4
-min_temp: 0
-max_temp: 70
-target_temp: 40
-control: watermark
-gcode_id: C
-
 
 [multi_pin soc_pin]
 pins: PD12, PD13