Autocommit from 2025-03-29 08:17:20

Klipper version: v0.12.0-382-ga18c74be0

Moonraker version: v0.9.3-3-gccfe32f

Mainsail version: v2.13.2

macros/main.cfg

@@ -16,6 +16,7 @@ gcode:
 [include ../KAMP_Settings.cfg]
 #[include ../KAMP/KAMP_Settings.cfg]
 [include tools.cfg]
+[include nevermore.cfg]
 
 
 
@@ -155,6 +156,9 @@ gcode:
     #M190 S{BED_TEMP}    
     M109 S{EXTRUDER_TEMP}               ; M109 heat and wait for it to reach temp
     SFS_ENABLE
+    {% if BED_TEMP > 100 %}
+      _NEVERMORE_ON
+    {% endif %}
     M117   
     STATUS_CLEANING
     VORON_PURGE
@@ -173,7 +177,7 @@ variable_park_xy: [350,350]
 variable_up_z: 4 #12
 gcode:
     {% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity  * 60 %}
-    STATUS_BUSY
+    STATUS_BUSY    
     SET_SKEW CLEAR=1
     M400                           ; wait for buffer to clear
     G92 E0                         ; zero the extruder
@@ -186,7 +190,8 @@ gcode:
     G90                            ; absolute positioning
     G0 X{park_xy[0]} Y{park_xy[1]} F{park_speed}            ; park nozzle at rear
     #BED_MESH_CLEAR
-    SFS_DISABLE    
+    SFS_DISABLE
+    _NEVERMORE_OFF
     #M141 S35
     SET_STEPPER_ENABLE STEPPER=extruder ENABLE=0 #disable stepper
     STATUS_OFF    
@@ -207,13 +212,13 @@ gcode:
 [gcode_macro M141]
 gcode:
     {% set s = params.S|default(0)|float %}
-    SET_TEMPERATURE_FAN_TARGET temperature_fan=chamber target={s}
+    #SET_TEMPERATURE_FAN_TARGET temperature_fan=chamber target={s}
 
 [gcode_macro M191]
 gcode:
     {% set s = params.S|default(0)|float %}
     M141 S{s}
-    TEMPERATURE_WAIT SENSOR="temperature_fan chamber" MINIMUM={s}  
+    #TEMPERATURE_WAIT SENSOR="temperature_fan chamber" MINIMUM={s}  
 
 
 
@@ -222,6 +227,18 @@ gcode:
     #LCDRGB R=0 G=1 B=0  ; Turn LCD green
     PAUSE                ; Pause
 
+[gcode_macro M106] 
+rename_existing: M99106
+variable_fan_aliases: { 'exhaust_fan': ['fan3'] }
+gcode:
+    {% set fan = 'fan' + (params.P|int if params.P is defined else 0)|string %}
+    {% set speed = (params.S|float / 255 if params.S is defined else 1.0) %}
+    {% for key in fan_aliases %}
+      {% if fan in fan_aliases[key] %}
+        SET_FAN_SPEED FAN={key} SPEED={speed}    
+      {% endif %}
+    {% endfor %}
+
 [gcode_macro PAUSE]
 rename_existing: BASE_PAUSE
 gcode: