Autocommit from 2025-05-17 13:10:21

Klipper version: v0.13.0-114-g841a9ca2

Moonraker version: v0.9.3-74-g1c12414

Mainsail version: v2.14.0

firmware/octopus-pro.config

@@ -12,7 +12,7 @@ CONFIG_MACH_STM32=y
 # CONFIG_MACH_SIMU is not set
 CONFIG_BOARD_DIRECTORY="stm32"
 CONFIG_MCU="stm32h723xx"
-CONFIG_CLOCK_FREQ=400000000
+CONFIG_CLOCK_FREQ=520000000
 CONFIG_FLASH_SIZE=0x40000
 CONFIG_FLASH_BOOT_ADDRESS=0x8000000
 CONFIG_RAM_START=0x20000000
@@ -96,18 +96,31 @@ CONFIG_USB_SERIAL_NUMBER="12345"
 #
 # end of USB ids
 
-CONFIG_WANT_GPIO_BITBANGING=y
-CONFIG_WANT_DISPLAYS=y
-CONFIG_WANT_SENSORS=y
+CONFIG_WANT_ADC=y
+CONFIG_WANT_SPI=y
+CONFIG_WANT_SOFTWARE_SPI=y
+CONFIG_WANT_I2C=y
+CONFIG_WANT_SOFTWARE_I2C=y
+CONFIG_WANT_HARD_PWM=y
+CONFIG_WANT_BUTTONS=y
+CONFIG_WANT_TMCUART=y
+CONFIG_WANT_NEOPIXEL=y
+CONFIG_WANT_PULSE_COUNTER=y
+CONFIG_WANT_ST7920=y
+CONFIG_WANT_HD44780=y
+CONFIG_WANT_ADXL345=y
 CONFIG_WANT_LIS2DW=y
-CONFIG_WANT_LDC1612=y
+CONFIG_WANT_MPU9250=y
+CONFIG_WANT_ICM20948=y
+CONFIG_WANT_THERMOCOUPLE=y
 CONFIG_WANT_HX71X=y
 CONFIG_WANT_ADS1220=y
-CONFIG_WANT_SOFTWARE_I2C=y
-CONFIG_WANT_SOFTWARE_SPI=y
+CONFIG_WANT_LDC1612=y
+CONFIG_WANT_SENSOR_ANGLE=y
 CONFIG_NEED_SENSOR_BULK=y
 CONFIG_CANBUS=y
 CONFIG_CANBUS_FREQUENCY=1000000
+CONFIG_INLINE_STEPPER_HACK=y
 CONFIG_INITIAL_PINS="PE11"
 CONFIG_HAVE_GPIO=y
 CONFIG_HAVE_GPIO_ADC=y
@@ -116,6 +129,4 @@ CONFIG_HAVE_GPIO_I2C=y
 CONFIG_HAVE_GPIO_HARD_PWM=y
 CONFIG_HAVE_STRICT_TIMING=y
 CONFIG_HAVE_CHIPID=y
-CONFIG_HAVE_STEPPER_BOTH_EDGE=y
 CONFIG_HAVE_BOOTLOADER_REQUEST=y
-CONFIG_INLINE_STEPPER_HACK=y