mikhail/LeoVoron2.4
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Autocommit from 2025-05-26 18:03:57

Browse Source 
Klipper version: v0.13.0-114-g841a9ca2

Moonraker version: v0.9.3-74-g1c12414

Mainsail version: v2.14.0
This commit is contained in:
Михаил
2025-05-26 18:03:57 +03:00
parent 1207a99ffd
commit 1463f8d105
8 changed files with 842 additions and 67 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
mmu/base/mmu_parameters.cfg
View File

@@ -230,7 +230,7 @@ bowden_pre_unload_error_tolerance: 50
# Note: The homing_endstop will be ignored ("none") if a toolhead sensor is available unless "extruder_force_homing: 1"
#
extruder_homing_max: 80 # Maximum distance to advance in order to attempt to home the extruder
extruder_homing_endstop: collision # Filament homing method/endstop name (fallback if toolhead sensor not available)
extruder_homing_endstop: extruder # Filament homing method/endstop name (fallback if toolhead sensor not available)
extruder_homing_buffer: 25 # Amount to reduce the fast bowden load so filament doesn't overshoot the extruder homing point
extruder_collision_homing_current: 30 # % gear_stepper current (10%-100%) to use when homing to extruder homing (100 to disable)
@@ -269,15 +269,15 @@ toolhead_homing_max: 40 # Maximum distance to advance in order to attempt to h
# NOTE: If you have a toolhead sensor you can automate the calculation of these parameters! Read about the
# `MMU_CALIBRATE_TOOLHEAD` command (https://github.com/moggieuk/Happy-Hare/wiki/Blobbing-and-Stringing#---calibrating-toolhead)
#
toolhead_extruder_to_nozzle: 72 # Distance from extruder gears (entrance) to nozzle
toolhead_sensor_to_nozzle: 62 # Distance from toolhead sensor to nozzle (ignored if not fitted)
toolhead_entry_to_extruder: 8 # Distance from extruder "entry" sensor to extruder gears (ignored if not fitted)
toolhead_extruder_to_nozzle: 99.38 # Distance from extruder gears (entrance) to nozzle
toolhead_sensor_to_nozzle: 79.78 # Distance from toolhead sensor to nozzle (ignored if not fitted)
toolhead_entry_to_extruder: 13.29 # Distance from extruder "entry" sensor to extruder gears (ignored if not fitted)
# This setting represents how much residual filament is left behind in the nozzle when filament is removed, it is thus
# used to reduce the extruder loading length and prevent excessive blobbing but also in the calculation of purge volume.
# Note that this value can also be measured with the `MMU_CALIBRATE_TOOLHEAD` procedure
#
toolhead_residual_filament: 0 # Reduction in extruder loading length because of residual filament left behind
toolhead_residual_filament: 20 # Reduction in extruder loading length because of residual filament left behind
# TUNING: Finally, this is the last resort tuning value to fix blobbing. It is expected that this value is NEAR ZERO as
# it represents a further reduction in extruder load length to fix blobbing. If using a wipetower and you experience blobs
@@ -378,7 +378,7 @@ extruder_purge_current: 100 # % of extruder current (100%-150%) to use when pur
# If equipped with TMC drivers the current of the gear and extruder motors can be controlled to optimize performance.
# This can be useful to control gear stepper temperature when printing with synchronized motor
#
sync_to_extruder: 0 # Gear motor is synchronized to extruder during print
sync_to_extruder: 1 # Gear motor is synchronized to extruder during print
sync_gear_current: 70 # % of gear_stepper current (10%-100%) to use when syncing with extruder during print
sync_form_tip: 0 # Synchronize during standalone tip formation (initial part of unload)
sync_purge: 0 # Synchronize during standalone purging (last part of load)