Autocommit from 2025-03-16 16:36:41

Klipper version: v0.12.0-382-ga18c74be0

Moonraker version: v0.9.3-3-gccfe32f

Mainsail version: v2.13.2

macros/config_backup.cfg

@@ -1,9 +1,9 @@
- [gcode_shell_command backup_cfg]
+[gcode_shell_command backup_cfg]
- command: ~/printer_data/config/autocommit.sh
+command: sh /home/biqu/printer_data/config/autocommit.sh
- timeout: 30
+timeout: 30
- verbose: True
+verbose: True
 
- [gcode_macro BACKUP_CFG]
+[gcode_macro BACKUP_CFG]
- description: Backs up config directory GitHub
+description: Backs up config directory GitHub
- gcode:
+gcode:
-     RUN_SHELL_COMMAND CMD=backup_cfg
+   RUN_SHELL_COMMAND CMD=backup_cfg

macros/main.cfg

@@ -526,22 +526,6 @@ gcode:
 
     # Restore previous gcode state (absolute/relative, etc)
     RESTORE_GCODE_STATE NAME=TEST_SPEED
-
-[gcode_macro test]
-gcode:
-  {% set iterations = params.ITERATIONS|default(5)|int %}
-  ;G32
-  SAVE_GCODE_STATE NAME=TEST
-  G1 Z10 
-  ;SET_VELOCITY_LIMIT ACCEL=8000
-  SET_VELOCITY_LIMIT ACCEL=10000 SQUARE_CORNER_VELOCITY=12
-  {% for i in range(iterations) %}
-    G1 F18000
-    G1 X300 Y300
-    G1 X150 Y50    
-  {% endfor %}
-  SET_VELOCITY_DEFAULT
-  RESTORE_GCODE_STATE NAME=TEST
   
 
 [gcode_macro _bot_data]

printer.cfg

@@ -129,7 +129,7 @@ pid_kd: 278.281
 [probe]
 x_offset: 0
 y_offset: 0
-#z_offset: -0.825
+z_offset: -0.890
 lift_speed: 15 #10
 speed: 3.0 #5
 samples: 3
@@ -207,9 +207,6 @@ algorithm: bicubic
 #*# xz_skew = 0.0
 #*# yz_skew = 0.0
 #*#
-#*# [probe]
-#*# z_offset = -0.890
-#*#
 #*# [bed_mesh default]
 #*# version = 1
 #*# points =
@@ -226,3 +223,5 @@ algorithm: bicubic
 #*# max_x = 217.19799999999998
 #*# min_y = 146.587
 #*# max_y = 202.78699999999998
+
+[include shell_command.cfg]

shell_command.cfg

@@ -0,0 +1,7 @@
+[gcode_shell_command hello_world]
+command: echo hello world
+timeout: 2.
+verbose: True
+[gcode_macro HELLO_WORLD]
+gcode:
+    RUN_SHELL_COMMAND CMD=hello_world