Autocommit from 2025-03-16 16:36:41

Klipper version: v0.12.0-382-ga18c74be0

Moonraker version: v0.9.3-3-gccfe32f

Mainsail version: v2.13.2

macros/config_backup.cfg

@@ -1,9 +1,9 @@
- [gcode_shell_command backup_cfg]
- command: ~/printer_data/config/autocommit.sh
- timeout: 30
- verbose: True
+[gcode_shell_command backup_cfg]
+command: sh /home/biqu/printer_data/config/autocommit.sh
+timeout: 30
+verbose: True
 
- [gcode_macro BACKUP_CFG]
- description: Backs up config directory GitHub
- gcode:
-     RUN_SHELL_COMMAND CMD=backup_cfg
+[gcode_macro BACKUP_CFG]
+description: Backs up config directory GitHub
+gcode:
+   RUN_SHELL_COMMAND CMD=backup_cfg

macros/main.cfg

@@ -526,22 +526,6 @@ gcode:
 
     # Restore previous gcode state (absolute/relative, etc)
     RESTORE_GCODE_STATE NAME=TEST_SPEED
-
-[gcode_macro test]
-gcode:
-  {% set iterations = params.ITERATIONS|default(5)|int %}
-  ;G32
-  SAVE_GCODE_STATE NAME=TEST
-  G1 Z10 
-  ;SET_VELOCITY_LIMIT ACCEL=8000
-  SET_VELOCITY_LIMIT ACCEL=10000 SQUARE_CORNER_VELOCITY=12
-  {% for i in range(iterations) %}
-    G1 F18000
-    G1 X300 Y300
-    G1 X150 Y50    
-  {% endfor %}
-  SET_VELOCITY_DEFAULT
-  RESTORE_GCODE_STATE NAME=TEST
   
 
 [gcode_macro _bot_data]