Autocommit from 2025-08-18 08:29:51

Klipper version: v0.13.0-154-g9346ad19

Moonraker version: v0.9.3-77-gccbfd64

Mainsail version: v2.14.0

firmware/boot_rp_sb2209.can

@@ -0,0 +1,54 @@
+CONFIG_LOW_LEVEL_OPTIONS=y
+# CONFIG_MACH_LPC176X is not set
+# CONFIG_MACH_STM32 is not set
+CONFIG_MACH_RPXXXX=y
+CONFIG_BOARD_DIRECTORY="rp2040"
+CONFIG_MCU="rp2040"
+CONFIG_CLOCK_FREQ=12000000
+CONFIG_FLASH_SIZE=0x200000
+CONFIG_FLASH_BOOT_ADDRESS=0x10000100
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=0x42000
+CONFIG_STACK_SIZE=512
+CONFIG_FLASH_APPLICATION_ADDRESS=0x10004000
+CONFIG_FLASH_START=0x10000000
+CONFIG_LAUNCH_APP_ADDRESS=0x10004000
+CONFIG_BLOCK_SIZE=64
+CONFIG_RPXXXX_SELECT=y
+CONFIG_MACH_RP2040=y
+# CONFIG_MACH_RP2350 is not set
+CONFIG_RP2040_HAVE_STAGE2=y
+# CONFIG_RP2040_FLASH_W25Q080 is not set
+CONFIG_RP2040_FLASH_GENERIC_03=y
+CONFIG_RP2040_STAGE2_FILE="boot2_generic_03h.S"
+CONFIG_RP2040_STAGE2_CLKDIV=4
+# CONFIG_RPXXXX_FLASH_START_0100 is not set
+CONFIG_RPXXXX_FLASH_START_4000=y
+# CONFIG_RPXXXX_USB is not set
+# CONFIG_RPXXXX_SERIAL_UART0_PINS_0_1 is not set
+# CONFIG_RPXXXX_SERIAL_UART0_PINS_12_13 is not set
+# CONFIG_RPXXXX_SERIAL_UART0_PINS_16_17 is not set
+# CONFIG_RPXXXX_SERIAL_UART0_PINS_28_29 is not set
+# CONFIG_RPXXXX_SERIAL_UART1_PINS_4_5 is not set
+# CONFIG_RPXXXX_SERIAL_UART1_PINS_8_9 is not set
+# CONFIG_RPXXXX_SERIAL_UART1_PINS_20_21 is not set
+# CONFIG_RPXXXX_SERIAL_UART1_PINS_24_25 is not set
+CONFIG_RPXXXX_CANBUS=y
+# CONFIG_RPXXXX_USBCANBUS is not set
+CONFIG_RPXXXX_CANBUS_GPIO_RX=4
+CONFIG_RPXXXX_CANBUS_GPIO_TX=5
+CONFIG_USB_VENDOR_ID=0x1d50
+CONFIG_USB_DEVICE_ID=0x6177
+CONFIG_USB_SERIAL_NUMBER="12345"
+CONFIG_CANSERIAL=y
+CONFIG_CANBUS=y
+CONFIG_CANBUS_FREQUENCY=1000000
+CONFIG_CANBUS_FILTER=y
+CONFIG_INITIAL_PINS=""
+CONFIG_ENABLE_DOUBLE_RESET=y
+# CONFIG_ENABLE_BUTTON is not set
+CONFIG_ENABLE_LED=y
+CONFIG_STATUS_LED_PIN="gpio26"
+CONFIG_BUILD_DEPLOYER=y
+CONFIG_HAVE_CHIPID=y
+CONFIG_KATAPULT_VERSION="v0.0.1-96-gbc1ecea"